A drain power resistor used for characterization of behavior not specified in a datasheet. Used for the RFP12N10L MOSFET.

Instance Variable	R	The resistance measured during the characterization test.
Method	setup	Subcircuit definition.

Inherited from NodeStuff (via Subcircuit):

Instance Variable	shunts	A dict of current sensing V elements with the pairs of nodes they connect.
Class Variable	debug	A `Bag` that gets set `True` for all instances to log info about each `setup` call.
Class Method	autoName	Undocumented
Method	setupResults	Undocumented
Method	fill	Undocumented
Method	nodeCheck	Call with the circuit building tool f and a sequence of nodes provided to this `Include` or `Subcircuit`.
Method	rawNetlist	Get lines of a raw netlist from a search hierarchy of possible sources.
Method	shunt	Call to insert a current-measuring shunt and add an entry to my `Elements` baton's dict of shunts.
Method	raw	See `Elements.raw`.
Method	iNode	See `Elements.iNode`.
Method	ground	See `Elements.ground`.
Method	sca	See `Elements.sca`.
Method	sca6	See `Elements.sca6`.
Class Method	_libDir	Undocumented
Method	_strippedLines	Undocumented
Method	_call_setup	Calls my `setup` method (almost always your override of that method, actually) and processes any return value.

Inherited from NodeStuff (via Subcircuit):

Instance Variable	shunts	A dict of current sensing V elements with the pairs of nodes they connect.
Class Variable	debug	A `Bag` that gets set `True` for all instances to log info about each `setup` call.
Class Method	autoName	Undocumented
Method	setupResults	Undocumented
Method	fill	Undocumented
Method	nodeCheck	Call with the circuit building tool f and a sequence of nodes provided to this `Include` or `Subcircuit`.
Method	rawNetlist	Get lines of a raw netlist from a search hierarchy of possible sources.
Method	shunt	Call to insert a current-measuring shunt and add an entry to my `Elements` baton's dict of shunts.
Method	raw	See `Elements.raw`.
Method	iNode	See `Elements.iNode`.
Method	ground	See `Elements.ground`.
Method	sca	See `Elements.sca`.
Method	sca6	See `Elements.sca6`.
Class Method	_libDir	Undocumented
Method	_strippedLines	Undocumented
Method	_call_setup	Calls my `setup` method (almost always your override of that method, actually) and processes any return value.

R =

The resistance measured during the characterization test.

def setup(self, f):

overrides pingspice.circuit.netlist.Subcircuit.setup

Subcircuit definition.

Why use f? Because it's short and a conveniently typed letter on the keyboard.

Override this if your subclass does not reference a param.ParameterFinder subclass via the Finder class attribute. As with Include.setup, your override method can return a dict of attribute names and values to set in my instance.

API Documentation for pingspice, generated by pydoctor at 2021-09-18 08:41:11.

pingspice.analysis.fixture.DrainResistor(Subcircuit) class documentation

`pingspice.analysis.fixture.DrainResistor(Subcircuit)` class documentation